Working principle The Pulse Valve Diaphragm divides the pulse valve into two air chambers. When the electromagnetic pulse valve is connected to the clean compressed air in the dust cleaning system of the pulse Bag Filter, the compressed air passes through the throttle hole and enters the rear air chamber. At this time the pressure of the rear air chamber is close to the outlet of the valve, the pulse valve is in the closed state and the pulse control instrument is output. The signal is to move the armature of the pulse valve, the gas chamber is open after the valve, and the air chamber is opened, the rear air chamber is quickly lost, the diaphragm is moved back, the compressed air is blown through the outlet of the valve, the pulse valve is in the open state, the output of the pulse control device disappears, the electromagnetic first lead armature of the pulse valve is reset, and the rear air chamber is deflated through the hole. When the pressure rises in the rear air chamber, the pulse valve diaphragm is close to the outlet of the valve, the pulse valve is in the closed state, the injection stop is stopped, and the size of the long and short gas amount of the injection time is controlled by the controller.
Looking for ideal High Quality Rubber Diaphragm Valve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the High Quality NBR are quality guaranteed. We are China Origin Factory of Turbo Diaphragm Pulse Valve Repair Bag. If you have any question, please feel free to contact us.
Product Categories : Dust Collector Fittings > Pulse Valve Diaphragm